. I would have to build a tap into it to serve my homebrew! Maybe put a kegerator under it. I was thinking build a square or circular top (kinda like a box but only 3/4" deep - the height of a snus tin), then filling the box with snus cans and putting a sheet of acrylic on top - maybe around 1/4". Circle would obviously be a little harder, but not impossible. It'd probably be about 3ft in diameter and about 4 or so feet off the floor (like a standard bar table that you stand at). It would take a bit of work, but probably wouldn't be too hard or expensive. Personally I'd add LEDs in between the snus cans controlled by some microcontroller just to add some flair
.


Leave a comment: