How to ecig with herb

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • BadAxe
    replied
    Originally posted by wa3zrm
    Vaped herbs do have a smell; however, not very powerful at all. I vape various types of herbs on a daily basis and there is no stench left behind like cigs. If you walk into a vaped herb cloud, you will notice a very distant sent that will be hard to distinguish what it is. Many of the vaped herbs I use have a very faint flower like smell.
    ^^^ This. If you walk into a room where vaping is occuring, or even a few minutes after its done, yes, you can smell weed (This i actually vaping weed I am talking about, not weed ejuice. But its maye 1/8 th of the odor compared to smoking it. But I could not get away with vaping it around someone I shouldn't be, because there is an odor.

    Weed e-juice, on the other hand, if flavored, will produce no weed odor whatsoever. BadKittySmiles makes mention several times in her threads about vaping her ecig with her flavored weed e-juice at a carnival, feet away from cops, and getting compliments from the cops on the cotton candy smell of her vape. lol.

    Leave a comment:


  • topdog82
    replied
    Originally posted by wa3zrm
    BTW, you can vape nasal snuff. Just soak it in VG for two to three weeks and strain it with cheese cloth. If you are adventurous, try mixing some nasal snuff with snus. Store in a dark bottle and shake daily for at least two/three weeks. Add flavoring as desired.
    Damnnnnnnn imam try this...

    Leave a comment:


  • topdog82
    replied
    Originally posted by SnusoMatic
    i am just curious.... when weed is vaped does it smell like weed? could a person use it in an ecig in public and seem like they are vaping nic?
    It will smell a tad. But when I vaped hash thst was watered down with e liquid it smelt like steawberries. I did it in a bar last night with nobody questioming me further

    Leave a comment:


  • wa3zrm
    replied
    BTW, you can vape nasal snuff. Just soak it in VG for two to three weeks and strain it with cheese cloth. If you are adventurous, try mixing some nasal snuff with snus. Store in a dark bottle and shake daily for at least two/three weeks. Add flavoring as desired.

    Leave a comment:


  • wa3zrm
    replied
    Originally posted by SnusoMatic
    i am just curious.... when weed is vaped does it smell like weed? could a person use it in an ecig in public and seem like they are vaping nic?
    Vaped herbs do have a smell; however, not very powerful at all. I vape various types of herbs on a daily basis and there is no stench left behind like cigs. If you walk into a vaped herb cloud, you will notice a very distant sent that will be hard to distinguish what it is. Many of the vaped herbs I use have a very faint flower like smell.

    Leave a comment:


  • SnusoMatic
    replied
    i am just curious.... when weed is vaped does it smell like weed? could a person use it in an ecig in public and seem like they are vaping nic?

    Leave a comment:


  • BadAxe
    replied
    Originally posted by wa3zrm
    DO NOT VAPE ALCOHOL! I REPEAT, DO NOT VAPE ALCOHOL!

    Unless you know what you are doing, you can kill yourself!


    Any alcohol based tincture needs to be highly cut with WITH PHARMACY GRADE VEGETABLE GLYCERIN!



    Vaping alcohol bypasses your stomach and liver and is very easy to overdose on.

    Some plant materials need to be soaked in alcohol in order to release certain alkaloids; however, if that is necessary, the alcohol solvent needs to be reduced with VG before used for vaping. Drinking it is one thing... vaping is another. When you vape, you bypass several defenses designed to stop you from ODing.

    Again, DO NOT VAPE ALCOHOL!
    Adding everclear to vegetable glycerin makes propylene glycol the main ingredient in most e-juice. It is not added in a ratio that can be overdosed on. Its added in drops. for every 10 ml or so of VG ( or weed VG) you add 3 to 4 drops of everclear to make it nice and vapable. I am not advocating vaping alcohol tinctures. But everclear to cut the VG = PG.

    Leave a comment:


  • wa3zrm
    replied
    Use a Kanger Protank like this http://vaporjoe.blogspot.com/2013/04...tank-1422.html

    It's glass. Do a google search to find your best deal.

    Leave a comment:


  • topdog82
    replied
    Originally posted by wa3zrm
    DO NOT VAPE ALCOHOL! I REPEAT, DO NOT VAPE ALCOHOL!

    Unless you know what you are doing, you can kill yourself!


    Any alcohol based tincture needs to be highly cut with WITH PHARMACY GRADE VEGETABLE GLYCERIN!

    Vaping alcohol bypasses your stomach and liver and is very easy to overdose on.

    Some plant materials need to be soaked in alcohol in order to release certain alkaloids; however, if that is necessary, the alcohol solvent needs to be reduced with VG before used for vaping. Drinking it is one thing... vaping is another. When you vape, you bypass several defenses designed to stop you from ODing.

    Again, DO NOT VAPE ALCOHOL!
    yeah **** that...
    anyways. I tried myfriends' WTA liquid. He made it himself. It is awesome as ell. why isn't WTA offered over thecounter?

    I am mixed .1 of wax into a pyrex clearomizer with some strawberry hookah e liquid. It is too sick...

    It oesn't even smell like bud. More like strawberry. It is very watered down. I was watching TV and getting baked VERY slowly but surely throughout the entire thing

    I am going to try the very bad kitty's tincture methods with glycerin and see how it turns out. I am quite satisfied with it. Once again, I think it is awesome that it is watered down like that

    Is it okay to use it in a plastic clreaomizer? And can I put concentrates directly into the clearomizer?

    Leave a comment:


  • wa3zrm
    replied
    Originally posted by topdog82
    If I threw in alchohol based tincture, wudnt that get me a tad drunk? I didn't understand what you said about it changing?
    DO NOT VAPE ALCOHOL! I REPEAT, DO NOT VAPE ALCOHOL!

    Unless you know what you are doing, you can kill yourself!


    Any alcohol based tincture needs to be highly cut with WITH PHARMACY GRADE VEGETABLE GLYCERIN!

    Vaping alcohol bypasses your stomach and liver and is very easy to overdose on.

    Some plant materials need to be soaked in alcohol in order to release certain alkaloids; however, if that is necessary, the alcohol solvent needs to be reduced with VG before used for vaping. Drinking it is one thing... vaping is another. When you vape, you bypass several defenses designed to stop you from ODing.

    Again, DO NOT VAPE ALCOHOL!

    Leave a comment:


  • topdog82
    replied
    If I threw in alchohol based tincture, wudnt that get me a tad drunk? I didn't understand what you said about it changing?

    Leave a comment:


  • topdog82
    replied
    Originally posted by BadAxe
    If you are going to do that, you might as well instead, just get some food grade veg glycerin, and put the hash in that. The issue is, whether heat is used or not, glycerin as a solvent takes TIME. You can initially speed the process up a bit by applying heat (don't go over 190 degrees) for up to 8 hrs or so, then store it at room temp for a week or 2, or you can do it without heat, but it takes 2 to 3 months, and needs to be shaken about once a day. Glycerin is not as good of a solvent as oils, butter, or alcohol, but given the correct time it works well.

    If you make your glycerin tincture from VG + hash, when its ready, you should add a little bit of everclear to it (which in effect turns it into PG, which most e-juices are, then some flavoring if want.

    For vaping weed e-juice, its best to make it that way. For a more detailed explanation, join up at grasscity.com and look up BadKittySmiles posts on her tinctures, and making ejuice. She knows her stuff, and thats the method I follow.
    Sounds good, I will check her out

    Was my hypothesis right? That ecig juice is purely glycerin and nicotine and flavoring?

    I just figured that I would try it out with hash and hookah juice first before I try it with glycerin

    I was thinking of watering it down a ****ton and increasing discreetness

    Yeah, but bad kitt smiles' threads rotate around ecigs shaped like cigarettes, not the pen style ones. Are they any different? Sorry if I come off as naïve, I just have very little knowledge in this area

    Leave a comment:


  • BadAxe
    replied
    Originally posted by topdog82
    Yo sorry for the late response my computer broke and I had to scrape together money for a new one

    I will try and get a glass clearomizer. I was wondering, could I put say, a gram of hash into the clearmizer and throw in some hookah juice (the no nicotine ecig juice) and shake it around?

    I figure that ecig juice is mainly glycerin and nicotine andflaovring?

    I understand that the hash will be a tad watered down, but I kind of want that. Smaller doses of thc over a longer time. I can also titrate the doses easier like that. Sometimes I don't wanna get TOO baked. Just eough to sleep and wakeup fresh
    If you are going to do that, you might as well instead, just get some food grade veg glycerin, and put the hash in that. The issue is, whether heat is used or not, glycerin as a solvent takes TIME. You can initially speed the process up a bit by applying heat (don't go over 190 degrees) for up to 8 hrs or so, then store it at room temp for a week or 2, or you can do it without heat, but it takes 2 to 3 months, and needs to be shaken about once a day. Glycerin is not as good of a solvent as oils, butter, or alcohol, but given the correct time it works well.

    If you make your glycerin tincture from VG + hash, when its ready, you should add a little bit of everclear to it (which in effect turns it into PG, which most e-juices are, then some flavoring if want.

    For vaping weed e-juice, its best to make it that way. For a more detailed explanation, join up at grasscity.com and look up BadKittySmiles posts on her tinctures, and making ejuice. She knows her stuff, and thats the method I follow.

    Leave a comment:


  • topdog82
    replied
    Originally posted by wa3zrm
    Yep, you are right on the money! Most tinctured juices contain some wicked and heavy alkaloids. Pyrex tank soaked in Everclear grain is the trick for a good cleaning.
    Yo sorry for the late response my computer broke and I had to scrape together money for a new one

    I will try and get a glass clearomizer. I was wondering, could I put say, a gram of hash into the clearmizer and throw in some hookah juice (the no nicotine ecig juice) and shake it around?

    I figure that ecig juice is mainly glycerin and nicotine andflaovring?

    I understand that the hash will be a tad watered down, but I kind of want that. Smaller doses of thc over a longer time. I can also titrate the doses easier like that. Sometimes I don't wanna get TOO baked. Just eough to sleep and wakeup fresh

    Leave a comment:


  • wa3zrm
    replied
    Originally posted by BadAxe
    When I make my weed e-juice, I will be using it in the ProTanks (Pyrex Glass) because with weed e-juice, rinsing with water probably will not clean the clearomizers from the trichome residue buildup, for that, iso-alcohol is needed, and I don't want to rinse plastic with iso-alcohol, so I will use my glass tanks for the weed ejuice so I can clean them properly.
    Yep, you are right on the money! Most tinctured juices contain some wicked and heavy alkaloids. Pyrex tank soaked in Everclear grain is the trick for a good cleaning.

    Leave a comment:

Related Topics

Collapse

Working...
X